Prinze RGT-14 electric pump up to 18.5m

POWER: 1.5HP - THREE-PHASE 380V RPM: 2900 From 100l/min.: 18.5m height Up to 600l/min.: 6m height *See attached .pdf for capacity table Manometric height up to 38 m Flow rate up to 600 l/min (36 m3/h) EMPLOYMENT LIMITS Suction height up to 7 m Liquid temperature up to +90 °C Ambient temperature up to +40 °C INSTALLATION AND USE FEATURES The series is made up of monobloc electric pumps with a single radial centrifugal impeller, which allows pumping fluids relatively loaded with small impurities, with high flow rates at low height. They are suitable for domestic use, agricultural or industrial, in irrigation, transfers, filling of tanks, from wells, reservoirs, canals and rivers, etc. It is recommended its use for water or chemically non-aggressive liquids. Its installation must be carried out properly, in places protected from the weather and when the motor is three-phase. It will be protected with an appropriate motor guard. CONSTRUCTION FEATURES Pump body: Cast iron, with ISO 228/1 threaded suction and discharge ports Impeller: Centrifugal radial brass Mechanical seal: Ceramic, graphite and NBR. Motor shaft: Stainless steel EN10088-3 – 1.4104 Electric motor: With external ventilation, suitable for continuous service, with IP44 protection, class F insulation. 230v. 50 Hz. Single-phase with capacitor and built-in thermal protector. Three-phase 230/400 V. 50 Hz. IE2/IE3 (IEC60034-30)